HIGHWAY SEALANTS – Ruscoe highway sealant products require no mixing.  Looking for highway detector loop sealant? We have a variety of sealants suitable for use with traffic wire and highway detector loop.

Our Ruscoe Permanent Sealers all share the same outstanding performance characteristics:

  • Nitrile Rubber
  • Easy Application – one part systems, ready to use as supplied
  • No Priming – no primers ever required
  • No Tooling – all products are self-leveling
  • Fast Drying – each product is tack free in ten minutes allowing traffic almost immediately
  • Long Reliability – each product will remain pliable from -60°F to +300°F(-51°C to +149°C)
  • Outstanding Weather-ability – our products are virtually unaffected by salts, chemicals, oils, grease, transmission fluid, gasoline, jet fuel, sunlight, rain, snow, ozone, or temperature extremes

Our MS Self-Leveling Loop Sealant and MS Non-Sag Joint Sealant contain no solvent and are VOC Compliant in California and the OTC States. These sealants are 100% solids and exhibit superior flexibility and adhesion to both concrete and asphalt. Beyond access gates, car wash industry and toll booth access, our highway detector loop sealants are designed for use in a variety of industries.

highway sealants
Our highway sealant products are virtually unaffected by chemicals and extreme weather conditions.

RUSCOE Highway Sealant Products
Highway Detector Loop Sealant

RUSCOE PERMANENT SEALER – 974 TRAFFIC LOOP SEALANT – Nitrile Rubber
Color: Gray, Black
Uses: Designed primarily for sealing the saw cuts for inductive loop wire installations. It effectively seals saw cuts in asphaltic concrete and Portland cement concrete. The sealant is paintable. Will seal wire installations for privacy gates, parking lot entries, parking ramp entries, toll gates or wherever wires need sealing. Has been used effectively as a random crack filler in both Portland cement concrete or asphalt concrete.
Available in 28 oz. cartridges, 5 gallon pails and 50 gallon drums.
Gray (974-QG)
Black (974-QB)
Click here for TECH DATA SHEET (#13)

RUSCOE PERMANENT SEALER – 983 JOINT SEALANT – Nitrile Rubber
Color: Gray, Black
Uses: Highway joint sealant is especially effective for sealing transverse and longitudinal contraction and expansion joints, center line and shoulder (edge) joints. These joints can be on a bridge or roadway. Can be used as the original sealant in new concrete construction or as a remedial or repair sealant in old construction.
Available in 28 oz. cartridges, 5 gallon pails and 50 gallon drums.
Gray (983-QG)
Black (983-QB)
Click here for TECH DATA SHEET (#15)

RUSCOE PERMANENT SEALER – 965 CURB SEALANT (NON-SAG) – Nitrile Rubber
Color: Gray, Black
Uses: Especially effective for sealing bridge deck vertical curbs or any other area requiring a tough resilient sealant.
Available in 28 oz. cartridges, 5 gallon pails and 50 gallon drums.
Gray (965-QG)
Black (965-QB)
Click here for TECH DATA SHEET (#14)

MS PERMANENT SEALER – TRAFFIC DETECTOR LOOP SEALANT – LOW VOC’s
Color: Gray, Black
Uses: Ideal for use in any electrical situation. Airfield lighting can be sealed. Security gates with exposed wire can be held in place. Will seal any kind of conductive loop as well as the loop connections between the loop and wires and the lead-in wires at the pull box where problems occur due to the boxes filling with water.
Available in 28 oz. cartridges, 5 gallon pails and 50 gallon drums.
Gray (MS-Q-SL-G)
Black (MS-Q-SL-B)
Click here for TECH DATA SHEET (#25)

MS PERMANENT SEALER – NON-SAG JOINT SEALANT – NO VOC’s
Color: Gray, Black
Uses: MS Non-sag joint sealant is extremely UV and weather resistant as well as low VOC/HAPS free. Non-yellowing, will not crack, peel, shrink or stain.
Available in 28 oz. cartridges, 5 gallon pails and 50 gallon drums.
Gray (MS-Q-NS-G)
Black (MS-Q-NS-B)
Click here for TECH DATA SHEET (#24)

Be sure to ask about our highway detector loop sealant when you call for information.

highway detector loop sealant