Markets
Agriculture
Automotive / RV
Building & Construction
Pools
Roofing
Product Type

Sealants

Gutter & RV Roofing Sealants

Permanent

Applications

Sealing cattle troughs (agriculture); Waterproofing, vertical seams (building construction, pools); Gutter sealant, vertical seams (roofing)
Packaging

4 oz Tube, 10 oz Cartridge
Downloads TDS SDS
Videos
Color

Permanent Sealer Clear HV (High-Viscosity) – CPS-HV

Ruscoe Clear Tripolymer Sealant is a single component, high-performance elastomeric sealant for use in a wide variety of roofing, trim, architectural metal, manufacturing, underdeck system, solar roof system and general construction applications.

SUGGESTED USES

  • Most non-traffic-bearing joints, including those where structural movement or stress is expected
  • Primer less application to brick, concrete, metal, glass, treated and untreated wood, asphaltic materials and vinyl
  • Where ultraviolet resistant material is required
  • Where a paintable sealant is required
  • As a trim sealant for metal components

PRODUCT BENEFITS

  • Excellent flexibility and elongation
  • UV resistant
  • Will not crack
  • Asphalt shingle compatible
  • Paintable
  • Mildew resistant when cured
  • Clear in color
  • Excellent adhesion to most surfaces
  • Adhesion to damp surfaces

Ruscoe Permanent Sealer – High Viscosity Sealant is packaged in 10.3-ounce cartridges to be applied using a caulking gun OR in a 4-ounce squeeze tube. Apply with conventional caulking equipment, filling joint completely. When temperature is below 40° F, application will be easier if sealant is warmed. When the temperature of surface to be sealed exceeds 140° F, do not apply sealant until surface cools. A soap solution or a solvent such as xylene may be used as a lubricant for tooling. Follow manufacturer’s instructions for safe use. Do not allow tooling agents to contaminate open joints. Sealant may be painted after 24 hours. If using a non-flexible paint allow 4 days of cure time prior.

Health and safety data sheets available upon request at The Ruscoe Company.

Typical Properties:
10.3 oz Caulk Cartridge / 4 oz Tube Grade

Color Clear
Base Polymer Tripolymer / Tripolymer
Solids, by Weight % 64 – 67% / 62 – 65%
Elongation 1060% / 900%
Viscosity, Brookfield, Test Result, CPS (#7 @ 20 RPM) 176,000 – 276,000 / 50,000 – 70,000
Pounds Per Gallon @77°F (25°C) 7.7 / 7.65
Application Temperature, °F 40 – 100 / 40 – 100
Clean Up MEK, Xylene, Toluol / MEK, Xylene, Toluol

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top