Markets
Specialty
Product Type

Adhesives

Reliobond

Synthetic

Applications
Packaging

Gallon Can, 5 Gallon Pail, Drum
Downloads TDS SDS
Videos
Color

Reliobond® 705 Adhesive (RB705) – Synthetic Resin

Reliobond® 705 adhesive is water-based and designed primarily for bonding vinyl film to various surfaces.

PRODUCT BENEFITS

  • High wet tack
  • Retains high bond strength upon aging
  • Non-flammable
  • Can be modified with chlorinated and aromatic solvents
  • Easily thickened
  • Fair resistance to humidity and sunlight
  • Excellent mechanical stability

On porous or semi-porous surfaces, such as chipboard, plywood and hardboard, Reliobond® adhesive should be applied to the surface and the bond should be accomplished within 30 seconds after adhesive application. For optimum results, approximately 10 psi pressure should be applied to the bond to insure good contact,

Reliobond® 705 adhesive should not be stored at less than 40°F. Once it has been frozen, it cannot be returned to its original state. No special precautions are necessary for handling Rebiobond 705 adhesive. Shell life is 6 months in closed container.

Health and safety data sheets available upon request at The Ruscoe Company.

Typical Properties:

Color White
Solids, by Weight % 56%
Solvent Formulation None
Viscosity, Brookfield, CPS 1,300
Pounds Per Gallon @77°F (25°C) 8.9
Specific Gravity 1.07
Flash Point, °F None when wet
Thinner Water
Clean Up Water or Toluene
Drying time (mins) 1 – 20

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top