Markets
Agriculture
Building & Construction
Roofing
Product Type

Sealants

Gutter

NRS Sealants

Applications

Sealing cattle troughs (agriculture); Waterproofing, Horizontal seams (building construction); Gutter sealant, Horizontal seams (roofing)
Packaging

10 oz Cartridge
Downloads TDS SDS
Videos
Color

Professional Strength (NRS 110) Seam Sealant

Ruscoe’s Professional Strength Seam Sealer is recommended for sealing openings less than 1/8 inch.

SUGGESTED USES
NRS Seam Sealer can be used as an effective sealant against water, chemicals, and dirt for sealing seams in gutters, downspouts, roof and chimney flashings, animal feeders and troughs, wood, concrete, ceramic, brick, metal, stone, masonry, marble, and glass.

Ruscoe’s NRS #1 Seam Sealer is recommended for sealing horizontal seams only.

PRODUCT BENEFITS

  • Aluminum-fortified adhesive formula.
  • Excellent adhesion.
  • Excellent exterior durability
  • Can be applied at low temperatures
  • Requires no primer
  • Good adhesion to either porous or non-porous substrates – including glass
  • Weatherproof – skins over to form a protective seal
Professional Strength Nitrile Rubber Sealant #1

Ruscoe Professional Strength Seam Sealer is packaged in 10.6-ounce cartridge to be applied using a caulking gun.

#1 Seam Sealer, #2 Self-Leveling Sealant and #3 Non-Sag Sealant are members of a special family of sealants based upon an aluminum fortified formula, they incorporate the protective and elastic qualities of synthetic elastomers. Ruscoe Professional Strength Nitrile Rubber Sealants DO NOT require primers on properly prepared surfaces, they can be applied in relatively LOW temperatures and skin over to form a protective seal.

Health and safety data sheets available upon request at The Ruscoe Company. Ruscoe nitrile rubber sealants contain ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.

Typical Properties:

Color Aluminum
Base Polymer Nitrile Rubber
Solids, by Weight % 44%
Specific Gravity 0.96
Flash Point, (TCC), °F <24
Solvent Formulation Ketone, Aromatic
Viscosity, Brookfield, Test Result, CPS (#6 @10 rpm) 44,000
Pounds Per Gallon @25°C (77°F) 7.99
Application Temperature, °F 40-100
Clean Up Methyl Ethyl Ketone
VOC grams/liter 90

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top