Ruscoe Low VOC Membrane Cleaner
Ruscoe VOC-Exempt Membrane Cleaner is used to remove dirt, asphalt or other contaminants from PVC, TPO and EPDM membrane to ensure a good weld or bond. It is required when tapes or adhesives are used on the membrane.
Apply cleaner to a clean, natural fiber rag and remove contaminants by using a scrubbing motion. Ruscoe V.O.C. Exempt Membrane Cleaner is to be used only in wipe cleaning using a wetted rag or similar material. Change rags frequently. Allow the membrane cleaner to dry thoroughly prior to application of tape or adhesives.
PRECAUTIONS
Membranes or flashings that have been exposed to weather or the elements longer than seven days must be cleaned with Ruscoe V.O.C. Exempt Membrane Cleaner prior to welding or bonding. Refer to Safety Data Sheet (SDS) prior to using Ruscoe V.O.C. Exempt Membrane Cleaner.
Store in a dry area protected from weather and extreme temperatures. DO NOT STORE IN DIRECT SUNLIGHT. Ruscoe V.O.C. Exempt Membrane Cleaner is flammable and must be kept away from heat, sparks, and flames. Use only in well-ventilated areas. Close containers after use. May cause possible skin irritation; use chemically resistant gloves when using this product. Keep out of reach of children. Shelf life is 12 months when stored between 60°F – 80°F (16°C – 27°C) in unopened containers.
Health and safety data sheets available upon request at The Ruscoe Company.
Typical Properties:
| Color | Clear | |
| Solvent Formulation | Acetone | |
| Flash Point, (TCC), °F | 0°F | |
| Pounds Per Gallon @77°F (25°C) | 6.61 | |
| Coverage Rate | Approximately 400ft²/gal (9.82m²l) |