Markets
Industrial
Specialty
Product Type

Adhesives

Reliobond

Applications

General purpose adhesive (industrial); Bonding flexible vinyl (specialty)
Packaging
Downloads TDS SDS
Videos
Color

Reliobond® Low VOC General Purpose Adhesive (SC-215A)

Reliobond® SC-215A is a general-purpose adhesive that can be used to bond a variety of plastics, fabrics and metals. Reliobond SC-215A is particularly well suited for bonding flexible vinyl as it is highly resistant to plasticizer migration. Reliobond SC-215A can be applied as a contact adhesive or heat cured for additional bond strength. Reliobond SC-215A has a low VOC solvent system (<110 g/L, <1.5%).

All bonding surfaces must be free of oils, dirt and other contaminates. Metal surfaces should be de-greased using an alkaline cleaning solution or a solvent rinse. Plastics should be wiped clean with isopropyl alcohol or toluene to remove any mold releases or other surface contaminates.

Reliobond® SC-215A can be applied by brush, spray, or roller. For spray application, dilution of Reliobond SC-215A with methyl ethyl ketone, methyl acetate, acetone or n-butyl acetate may be necessary.

When using Reliobond SC-215A as a contact adhesive, coat both bonding surfaces. After 2-3 minutes drying time, the bonding surfaces can be mated and pressed together. If the adhesive gets too dry and a good bond cannot be formed the adhesive can be reactivated by wiping with acetone or methyl ethyl ketone or by applying a fresh coat of adhesive.

HEAT CURING
Reliobond SC-215A can be heat cured at 280°F-350°F for 5 minutes to 1 hour to create a stronger, more chemical resistant bond. During this cure process, pressure is also recommended for creating the best bond. 75-150 psi should be applied.

Recommended storage temperature for Reliobond® SC-215A is 40°F-60°F (4°C-16°C). Prolonged storage at temperatures above 60°F can cause curing or gelling of the adhesive. If cold storage is not available, try to keep the adhesive in a cool, dry area.

Health and safety data sheets available upon request at The Ruscoe Company. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.

Typical Properties:

Color Tan
Solids, by Weight % 14% – 16%
Solvent Formulation Acetone / MEK
Viscosity, Brookfield, CPS 100-125
Pounds Per Gallon @77°F (25°C) 7.01
Shelf Life 12 Months

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top