Markets
Aerospace
Automotive / RV
Building & Construction
Industrial
Marine
Specialty
Product Type

Adhesives

Nitrile Rubber

Reliobond

Thermosetting

Applications

Rubber adhesion (aerospace); Waterproofing, above water surfaces (marine); Wood, metal, glass, wallboard (building construction); Primer for vinyl coatings, brick and stone (industrial); Heat exchanger gaskets, electrical applications (specialty); Gaskets, convertible tops (automotive RV)
Packaging

1/2 Pint Can, Pint Can, Quart Can, Gallon Can, 5 Gallon Pail, Drum
Downloads TDS SDS
Videos
Color

Reliobond® 35 General Purpose VOC-Compliant Adhesive

Reliobond® 35 adhesive has a wide range of uses to bond all porous and nonporous substrates. This adhesive maintains a permanent flexible bond over a wide variety of substrates. Reliobond 35 is VOC-compliant with low water absorption making it great in waterproofing projects. Being nitrile based, Reliobond 35 has excellent oil, gas, and grease resistance.

SUGGESTED USES
Reliobond 35 can be used to coat plastic, wood, metal, ceramics, glass, rubber, paper, leather, plaster, stone, brick, concrete. It can be used as a sealer and water repellent as well. Reliobond 35 works well on porous surfaces whereas Reliobond® 25 should be used on smooth surfaces.

Bonding surfaces must be free of moisture, oils, dirt, and other contaminates. Reliobond® 35 can be applied through multiple methods such as spraying, brushing, knife and roll coating. The working time for this adhesive is 5 minutes.

Reliobond® 35 adhesive is flammable and should be stored in tightly sealed containers away from direct sunlight, heat, sparks or other potential sources of ignition. The Ruscoe Company recommends storage in original, sealed container between 60°F and 80°F.

Health and safety data sheets available upon request at The Ruscoe Company. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.

Typical Properties:

Color Tan
Solids, by Weight % 28% – 32%
Solvent Formulation Acetone / MEK
Viscosity, Brookfield, Test Result, CPS (#4 @ 10 rpm) 3,000 – 10,000
Pounds Per Gallon @77°F (25°C) 6.9 – 7.3
Shelf Life 12 Months

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top