Markets
Aerospace
Automotive / RV
Building & Construction
Industrial
Marine
Specialty
Product Type

Adhesives

Nitrile Rubber

Pliobond

Thermosetting

Applications

Rubber adhesion (aerospace); Waterproofing, above water surfaces (marine); Wood, metal, glass, wallboard (building construction); Primer for vinyl coatings, brick and stone (industrial); Heat exchanger gaskets, electrical applications (specialty); Gaskets, convertible tops (automotive RV)
Packaging

1/2 Pint Can, Pint Can, Quart Can, Gallon Can, 5 Gallon Pail, Drum
Downloads TDS SDS
Videos
Color

PLIOBOND® 35 General Purpose VOC-Compliant Adhesive

PLIOBOND® 35 adhesive is a general purpose, VOC compliant, thermosetting adhesive which can be used to bond virtually all porous and non-porous substrates. When cured, PLIOBOND 35 adhesive provides tough, chip-resistant bonds that remain flexible over a wide range of temperatures. Substrates bonded with PLIOBOND 35 adhesive offer excellent resistance to mechanical shock and oxidization. This adhesive offers excellent dielectric properties and has low water absorption.

SUGGESTED USES

  • PLIOBOND® 35 adhesive can be used as a sealer, primer, water repellent or coating for metal, wood, plastic, plastic film, ceramic, bone, ivory, glass, rubber, paper, leather, plaster, drywall, insulation, concrete, brick and stone
  • Assembling electric appliances and equipment
  • Doping electric motor armature coils
  • Anchoring non-skid materials to floors
  • Waterproofing awnings, tarps, convertible tops and outdoor furniture
  • Protecting above-water surfaces on watercraft

PLIOBOND® 35 adhesive comes ready to use – no conditioner, accelerator or catalyst are required.

PLIOBOND 35 adhesive can be applied by spraying, roll coating, knife coating or brushing.

When PLIOBOND® 35 adhesive is stored indoors, out of direct sunlight and in the original, unopened container between 60°F and 80°F (16°C to 27°C), the shelf life is six months. Always rotate stock.

PLIOBOND® 35 adhesive contains ingredients that could be harmful if mishandled. Contact with skin and eyes should be avoided and the recommended personal protective equipment should be worn.

Ruscoe maintains Safety Data Sheets on all of its products. Safety Data Sheets contain health and safety information for your development of appropriate product handling procedures to protect your employees and customers.

Our Safety Data Sheets should be read and understood by all of your supervisory personnel and employees before using our products in your facilities.

Typical Properties:

Base Synthetic Polymer
Color Tan
Solids by Weight, % 30.0±2
Solvent Formulation Ketone
Viscosity, Brookfield, cps, Spindle No. 4 @ 10 rpm 6,500±3,500
Specific Gravity 0.890
Pounds per Gallon @ 77°F (25°C) 7.41
Flash Point (Seta Flash) <0°F
VOC g/L (by formulation) <250 g/L (VOC-Compliant for regulated uses with limits of 250 g/L)
Coverage 340-360 sq ft/gal/dry mil
Application Temperature 40°F to 100°F (4°C to 38°C)
Service Temperature ASTM D-816-10 psi at 500°F (260°C) for 1 hour

Typical Values:

Based on material tested in our laboratories but varies from sample to sample. Typical values should not be construed as a guaranteed analysis of any specific lot or as specification items.


All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top