Markets
Agriculture
Building & Construction
Pools
Roofing
Product Type

Sealants

Gutter

Gutter & RV Roofing Sealants

Permanent

Applications

Sealing cattle troughs (agriculture); Waterproofing, Vertical seams (building construction); Waterproofing, Vertical seams (Pools); Gutter sealant, Vertical seams (roofing)
Packaging

10 oz Cartridge
Downloads TDS SDS
Videos
Color

Also available in:

Permanent Sealer HV (High-Viscosity)

Ruscoe’s Permanent Sealer Non-Sag Sealant is recommended for sealing openings and lap joints greater than 1/8 inch.

SUGGESTED USES
Ruscoe Non-Sag Sealant can be used as an effective sealant against water, chemicals, air and dirt for wood or metal doors and windows, metal buildings, mobile home roofs and bodies, HVAC ducting, concrete, ceramic, brick, metal, stone, masonry, marble and glass.

Non-Sag Sealant can be used on horizontal, vertical, over-head, slanted or angular surfaces.

PRODUCT BENEFITS

  • Aluminum-fortified adhesive formula
  • Excellent adhesion
  • Excellent exterior durability
  • Can be applied at low temperatures
  • Requires no primer
  • Good adhesion to either porous or non-porous substrates – including glass
  • Weatherproof – skins over to form a protective seal
Permanent Sealer HV

Ruscoe Permanent Sealer – High Viscosity Sealant are packaged in 10.3-ounce cartridge to be applied using a caulking gun, and is available in Aluminum, White and Brown.

Seam Sealers, Self-Leveling Sealant and Non-Sag Sealant are members of a special family of sealants based upon an aluminum fortified formula, they incorporate the protective and elastic qualities of synthetic elastomers. Ruscoe Permanent Sealer Nitrile Rubber Sealants DO NOT require primers on properly prepared surfaces, they can be applied in relatively LOW temperatures and skin over to form a protective seal.

Health and safety data sheets available upon request at The Ruscoe Company. Ruscoe nitrile rubber sealants contain ingredients which could be harmful if mishandled. Contact with skin and eyes should be avoided and necessary protective equipment and clothing should be worn.

Typical Properties:

Color Aluminum / White / Brown
Base Polymer Nitrile Rubber / Nitrile Rubber / Nitrile Rubber
Solids, by Weight % 59% / 57% / 57%
Flash Point, (TCC), °F  <0 / <0 / <0
Solvent Formulation Ketone, Aromatic, Ester / Ketone, Aromatic, Ester / Ketone, Aromatic, Ester
Viscosity, Brookfield, Test Result, CPS (#7 @ 20 RPM) 350,000 / 300,000 / 300,000
Pounds Per Gallon @77°F (25°C) 8.7 / 9.68 / 9.588
Application Temperature, °F 40 – 100 / 40 – 100 / 40 – 100
Clean Up Acetone / Acetone / Acetone
VOC grams/liter 90 g/L / 90 g/L / 90 g/L

All statements, technical information and recommendations contained herein are based on tests believed to be reliable, but the acduracy or completeness thereof is not guaranteed, and the following is made in lieu of all warranties expresses or implied.
Seller’s and manufacturer’s only obligation shall be to replace such quantity of the product proved to be defective. Neither seller or manufacturer shall be liable for any injury, loss, or damage, direct or consequential, arising out of the use of, or the inability to use the product. Before using, user shall determine the suitability of the product for their intended use and user assumes all risk and liability whatsoever in connection therewith. The foregoing many are not changed except by an agreement signed by officers of seller or manufacturer.
Go to Top