Reliobond® 708-R Contact Adhesive Low VOC
Reliobond® 708-R is a high-performance contact adhesive that can be used on a variety of substrates. RB-708-R is high-solids and provides a high yield with a smooth spray pattern that reduces telegraphing on thin laminates. It gives a water resistant, non-staining bond for common HPL applications.
SUGGESTED USES
Formulated for use in bonding a wide variety of materials, including, but not limited to decorative laminates, metals (not copper), plywood, particleboard, polyurethane foam and rigid plastic.
FEATURES
- Quick dry time
- High strength bonds
- Aggressive grab tack
- Smooth, flat spray pattern
- High green strength
- Long open time
- Excellent adhesion to many substrates
- Greenguard® Children & Schools Certified
Use only after careful consideration of the warnings, directions, and first aid instructions given. Do not thin. Surfaces to be bonded should be clean, dry and free of any dust, loose paint, wax, moisture, dirt, grease, oil, rust, or other contaminants. Stir thoroughly before using. The adhesive should be at 60ºF to 95ºF. For best results, adhesive and materials to be bonded should be 60ºF (15.6°C) to 95ºF (35°C) during application. Allow substrates to acclimate to room temperature for 48 hours before bonding. See page 2 of TDS for application directions by spray or brush.
The shelf life for an unopened container of this adhesive stored at temperatures between 60°F (15.6°C) and 95°F (35°C) is 1 year from date of manufacture. Store out of direct sunlight in a cool, well-ventilated area. Avoid storing container directly on the floor or against an outside wall.
ATTENTION: Empty container remains hazardous until all flammable vapors, which may explode upon ignition, are gone from residue and container. Observe all labeled hazard precautions. Do not cut, puncture, or weld while hazard exists. Do not reuse empty containers. Dispose of according to all federal, state, and local regulations.
Health and safety data sheets available upon request at The Ruscoe Company.
Typical Properties:
| Color | Clear/Red | |
| Solids, by Weight % | 30% – 34% | |
| Viscosity, Brookfield, Test Result, CPS (#2 @ 10 rpm) | 75 – 255 | |
| VOC Content (EPA Method 24) | 2.30 g/L | |
| Flash Point | 8.6°F (-13°) | |
| Shelf Life | 12 Months |